Appliance error codes, decoded. The right part, the first time.

LG Washer Error Code OE — Drain Error

What OE means The washer tried to pump the water out and the level did not drop — LG calls OE a "water outlet error." LG's own support page names two main causes: a clogged drain pump filter and a kinked drain hose. Work through those before anything else. (The first character is the letter O, not a zero; on some newer front-load models the same fault shows as E03 or E21.)
Safety: unplug the washer before cleaning the filter or opening any panel. Drain the filter housing with the small emergency drain tube first — opening the filter on a full tub releases all of its water at floor level.

What the code means

During drain, the control runs the drain pump and watches the water level. If the water does not leave in the expected time — on LG top-load models, LG states the code appears after about 13 minutes of failing to drain — the cycle stops and OE is displayed. OE is a drain-path report, not a death sentence for the pump: LG's published causes are all blockages, and a failed part is what remains after the path is proven clear.

Likely causes, in the order to check them

Step-by-step fix

  1. Unplug the washer and check the drain hose behind it: no kinks, no crush points, and in winter, no frozen section.
  2. Clean the drain pump filter (front-loaders). It sits behind the small service panel at the bottom-left front of the machine. Put a shallow pan and towels down, unclip the small drain tube, pull its cap, and let the leftover water drain into the pan. Cap the tube, then turn the filter counterclockwise and pull it out. Clear everything, rinse it, and reinstall it firmly. Most LG top-loaders have no user-accessible filter — skip to the next step.
  3. Run the bucket test to rule out your plumbing. Take the drain hose out of the standpipe, put the end in a bucket, and run a Spin Only cycle. If the washer drains strongly into the bucket, the clog is in your house drain, not the washer.
  4. Run LG's Drain & Spin test and listen. Press Power, set Spin Speed to High, and press Start/Pause. In the first ~15 seconds you should hear the drain pump hum. Hum plus no water movement means a blockage in the filter, hose, or pump housing. A loud grind means a broken impeller or a foreign object in the pump. No hum at all means the pump is not running — pump, wiring, or control.
  5. If suds are suspect, run an empty cycle. A rinse-and-spin with no detergent clears foam air pockets; if OE disappears, adjust your detergent dose (and use HE detergent in an HE machine).

The part involved

If the drain path is clear and the pump has failed, the replacement on most LG front-load washers (and the Kenmore and Kenmore Elite models built by LG) is the drain pump and motor assembly, LG part 4681EA2001T — a genuine OEM part carried by the major parts retailers. One catalog note worth knowing: per the manufacturer's notice relayed by parts retailers, this pump's design changed in April 2025 — the newer version has a gray casing with different fins and is a direct functional replacement. As always, confirm the part against your model number before ordering.

Affiliate slot — pending program approval

LG Drain Pump and Motor Assembly 4681EA2001T — buy links for RepairClinic and PartSelect will appear here once our affiliate accounts are active. Until then, search part number 4681EA2001T at your preferred parts retailer and verify fit with your model number.

Difficulty and cost picture

Filter cleaning: easy, about 15 minutes, no tools beyond a pan. Pump replacement: a moderate DIY job through the front or bottom of the machine. Published 2026 repair guides put a professional LG drain pump replacement in the mid-hundreds (parts and labor) — another reason the filter comes first.

When to call a pro

Filling problem instead of draining? See the LG IE (water inlet error) guide.

Sources

  • LG's own OE definition and main causes (clogged drain pump filter, kinked drain hose) — LG Support help library, "OE Error Code — Front Loader Washer" (lg.com). Checked November 2026.
  • Filter location and cleaning interval, suds and frozen-hose causes, 13-minute top-load window, E03/E21 equivalents, Drain & Spin test — The Appliance Team, "LG Washer Not Draining (OE Error)"; Repliance Pro, "LG Washer OE Error"; HomeFixCodes, "LG Washer OE Code." Checked November 2026.
  • Part 4681EA2001T verification — RepairClinic catalog (genuine OEM part #4681EA2001T, RC Item #2003273) across LG model parts pages; April 2025 design-change note via AppliancePartsPros. Checked November 2026.

Some links on this page may become affiliate links; see our affiliate disclosure. FixCode HQ is not affiliated with LG.