Appliance error codes, decoded. The right part, the first time.

How to Find the Model Number on Any Appliance

The short version Every appliance has a metal or foil tag — usually silver — listing its model number and serial number. On washers it is inside the door frame or under the lid; on refrigerators, inside the fresh-food compartment; on dishwashers, on the tub frame where the door closes. Take a photo of the whole tag before you order anything: the model number decides which error codes apply to your machine and which parts fit it.

Why the model number matters more than the brand

"Whirlpool washer" is not specific enough to fix anything. Two Whirlpool front-loaders five years apart can use different drain pumps, different control boards, and different error code lists. Parts catalogs are indexed by model number, not by brand and appliance. Every guide on this site assumes you will confirm your model number before ordering a part — it takes two minutes and prevents the most common DIY mistake there is: the right part for the wrong machine.

Where the tag is, by appliance

ApplianceWhere to look
Front-load washerInside the door frame, on the rim around the opening (open the door and look at the frame). On some models, on the back panel.
Top-load washerUnder the lid, on the back rim of the tub opening, or on the back panel of the machine.
DryerInside the door, on the door frame or just inside the drum rim.
RefrigeratorInside the fresh-food (refrigerator) compartment — on a side wall or the ceiling. Less often, behind the kick plate at the bottom front.
DishwasherOn the tub frame or the side edge of the door, visible when the door is open.
Range / ovenOn the frame behind the storage or warming drawer (open or remove the drawer), or inside the oven door frame.
Washer/dryer comboInside the door frame, like a front-load washer.

If the tag is worn, photograph it anyway and zoom in — the model number is also printed on the owner's manual cover and, for newer machines, often in the settings or "about" screen of the control panel or the manufacturer's app.

How to read the tag

Worked example

Say your front-load washer shows a drain error. The tag inside the door frame reads model WFW9200SQ00. That tells you: Whirlpool platform (WFW = front-load washer), a Duet-era machine — which means the long-drain code on your display may read F21, and the drain pump for this family is Whirlpool part 280187 (you can see both facts working together in our Whirlpool F21 guide). Without the model number, you would be guessing between several pumps that look nearly identical.

Brand decoder pages

Full per-brand decoders — what each character block of a Whirlpool, Samsung, or LG model number means, and how to read the manufacture date out of the serial number — are in the publishing queue alongside the brand error-code hubs (see the error code index). The tag locations and reading rules above apply to every brand today.

Safety note: the model tag is always readable without removing panels or reaching inside the machine. If you cannot find it in the locations above, check the back panel before opening anything — and unplug the appliance before moving it.

Sources

  • Washer tag locations (front-load door frame; top-load under lid / back) — corroborated by Whirlpool and LG support documentation and independent repair references, including FixCode Guides' Whirlpool washer code guide (fixcodeguides.com), checked November 2026.
  • Model-prefix examples — Whirlpool WFW-series models (e.g., WFW9200SQ00) and their drain pump 280187: AppliancePartsPros catalog data for part 280187 / AP3953640, checked November 2026. LG WM-series models (e.g., WM2601HW, WM3488HW): RepairClinic model parts pages, checked November 2026.